AMSOIL Synthetic 2-Cycle Oil

AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel Injected (EFI) and direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles, ATVs and jet boats, including, but not limited to, those manufactured by Bombardier®, Yamaha®, Arctic Cat®, Polaris®, Kawasaki®, Suzuki® and Honda®.

INTERCEPTOR 2-Cycle Oil (AIT)

High-performance 2-cycle oil with an emphasis on exhaust power valves. Contains high levels of detergent additives to prevent valve sticking. Replaces manufacturer-branded oils. Injector use or 50:1 premix. Excellent in snowmobiles, motorcycles, PWC, ATVs and jet boats.
Product Code: AIT               Product Sheet               See Pricing Information or Place an Order
DOMINATOR is recommended for use in high performance stock or modified two-cycle motors, including air or liquid cooled snowmobiles, personal watercraft, motorcycles (Moto X), ATVs, go-carts and outboard motors*. Good for use with coated or non-coated pistons, high-octane racing fuels and exhaust power valves. Compatible with most other two-cycle oils, however, mixing oils should be minimized.

DOMINATOR 2-Cycle Oil (TDR)

Racing 2-cycle oil with an emphasis toward high-horsepower and modified racing or trail motors. Contains higher viscosity base oils for best overall protection and additives for higher operating temperatures. Injector use or 50:1 pre-mix. For snowmobiles, motorcycles, ATVs, PWC, go-carts and racing outboard motors.
Product Code: TDR               Product Sheet               See Pricing Information or Place an Order
hp Injector is recommended for use in all two-cycle outboard motors including, but not limited to, Mercury® EFI & Optimax®, Johnson® and Evinrude® FICHT® and E-TEC™, Yamaha® HPDI, Nissan® and Tohatsu® TLDI®, Suzuki®, Mariner® and Force®. Also recommended for use in all two-cycle personal watercraft and jet boats, as well as snowmobiles, motorcycles and ATVs.

hp Injector Oil (HPI)

Excellent for all outboard motors with a performance emphasis on modern direct-fuel-injected (DFI) technology. Also recommended for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Injector use or 50:1 premix.
Product Code: HPI               Product Sheet               See Pricing Information or Place an Order

HP Marine Synthetic 2-Stroke Oil (HPM)

Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil). Helps prevent deposits, protects against wear, has low smoke, protects against rust and has low aquatic toxicity.  Superior performance as an injection oil or at 50:1 pre-mix.
Product Code: HPM               Product Sheet               See Pricing Information or Place an Order
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

Saber Professional (ATP)

Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on hand-held power equipment such as chainsaws and lawn/utility equipment.
Product Code: ATP               Product Sheet               See Pricing Information or Place an Order
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

Saber Outboard (ATO)

Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on the cooler operations of water-cooled motors.
Product Code: ATO               Product Sheet               See Pricing Information or Place an Order
AMSOIL Series 2000 Chaincase Oil provides superior protection and performance for enclosed chains. Ideal for snowmobiles, ATVs and general equipment. Extreme pressure additives provide extra wear protection. Extends chain life repels water, and inhibits rust, oxidation and foam. Superior low temperature starting, performance and protection.

Series 2000 Synthetic Chaincase Oil (TCC)

Provides superior protection and performance for enclosed chains. Ideal for snowmobles, ATVs and general equipment. Extreme-pressure additives provide extra wear protection. Extends chain life, repels water and inhibits rust, oxidation and foam. Superior low-temperature performance and protection.
Product Code: TCC               Product Sheet               See Pricing Information or Place an Order
Ideal for chainsaws and bicycle chains. Its semi-synthetic basestocks reduce drag effectively, which optimizes efficiency and extends chain life. Tacky formula clings to metal surfaces better than other oils, delivering unparalleled lubrication and protection.

Semi-Synthetic Bar and Chain Oil (ABC)

Tacky formula clings to metal surfaces better than other oils. Delivers unparalleled lubrication and protection. Anti-wear additives extend the life of bar and chain applications. Ideal for chainsaws.
Product Code: ABC               Product Sheet               See Pricing Information or Place an Order
2-Cycle Chart
Click Image to Enlarge
Watch AMSOIL Racing videos Click Here
For your convenience, AMSOIL offers Ea Oil Filters guaranteed for up to 15,000 miles or up to 25,000 miles, depending on application, when used with AMSOIL synthetic motor oil.

Application Guide - Click here to find the correct filter for your application.

Master Cross Reference Guide - Click here to determine which AMSOIL filter can be used to replace your existing filter by part number.

More Information - Click here to learn more about Ea Oil Filters.
Order Line: 1-800-956-5695 Referral# 1674377     ISO 9001:2008 Certified    Product Technical Services: (715)399-TECH
RochOil.com - AMSOIL Synthetic Motor Oil - Learn why AMSOIL is the Best Performing Synthetic Motor Oil